Apple iPhone 17 Pro 512 GB: 6.3-inch Display with ProMotion up to 120Hz, A19 Pro Chip, Breakthrough Battery Life, Pro Fusion Camera System with Center Stage Front Camera; Silver

الفارق الوحيد في الايفون ١٧ برو ، الحرارة صارت اقل من قبل بكثير

الجهاز ما يحتاج اصلي 100% وضمانه حاسبات العرب سنتين مبارك لي ولمن شراه ولمن بيشتريه

iPhone 17 Pro Scratch Issues (Sept 2025)

Widespread reports have emerged that new iPhone 17 Pro units scratch very easily. Media outlets and durability testers noted that the anodized-aluminum camera plateau edges chip off with minimal abrasion. In a JerryRigEverything test, a coin and key easily flaked away the colored coating at the bump’s corners. Users on social media (and Chinese forums on Weibo) quickly dubbed it “scratch-gate” as display models – especially in Deep Blue – were found with scuffs after only hours in-store. For example, Bloomberg reporters confirmed deep-blue 17 Pro and black iPhone Air demo units became visibly scratched within hours of retail display. Influencers and buyers flooded Twitter/X and Reddit complaining every 17 Pro they saw “had the scratch beneath the camera bump” (one Dubai shopper reported) and urging immediate case use. In short, early users and reviewers agree the new frame is highly prone to visible scratches – a largely cosmetic flaw that emerges even under careful handling.

Several tech sites emphasize that this weakness is by design: Apple’s choice of anodized aluminum without any chamfer or fillet on the camera bump means the hard protective layer “does not stick to corners very well,” as JerryRigEverything observed. In practice, everyday items like keys or coins will chip away the paint on those razor-sharp edges within minutes. Reviewers note that only the edges are vulnerable – mild scratches on flat surfaces tend to wipe off easily – but the effect is still obvious on the all-new plateau design. Media coverage (The Verge, Creative Bloq, AppleInsider, etc.) stresses that this issue is cosmetic, yet pervasive: “Scratch-gate is real and very disappointing”, one user tweeted, while AppleInsider advised buyers to *“use a case immediately if you don’t want to experience this issue”*. (Indeed, The Verge quipped that a new 17 Pro is a good excuse “to add a protective case, or live with that patina since the scratching is only a cosmetic issue”.)

Comparison with Previous iPhones

The 17 Pro’s scratch problem is largely due to Apple’s material changes. Previous Pro models (iPhone 15 Pro/Pro Max, and presumably iPhone 16 Pro/Max) used a titanium frame, whereas the 17 Pro returns to a 7000-series aluminum unibody. Titanium is very hard and resists scratches better, but is heavier and a poor heat conductor. Apple explicitly chose aluminum to dissipate heat (with a new vapor chamber) and enable brighter colors. MacRumors notes that titanium (and glass) used in older Pros are “stronger/harder than aluminum,” so it’s unsurprising the 17 Pro shows wear more readily. In other words, the 17 Pro trades some surface toughness for thermal performance and weight savings. (AppleInsider likewise points out that Apple’s **“choice to return to aluminum rather than titanium has been blamed for the issue”**.)

In practice this means scratch visibility now depends heavily on color. Dark finishes on aluminum (deep blue or black) reveal any nicks against the silver underlying metal, whereas lighter shades hide them better. Several reports echo that lighter colors or non-Pro models scratch much less noticeably. For example, AppleInsider and 9to5Mac note that the Cosmic Orange (bright aluminum) and new silver hues should fare better in daily use, while the Deep Blue Pro and Space Black Air already show obvious chips. In summary, compared to the stainless or titanium frames of recent iPhones, the iPhone 17 Pro’s softer aluminum chassis is a step backward in scratch-resistance – a trade-off Apple made for other benefits.

Frame & Finish Materials Analysis

The iPhone 17 Pro’s aluminum unibody is precision anodized (dyed). Anodizing normally creates a hard oxide shell (roughly Mohs 9 hardness) on aluminum’s surface. However, this protective layer can’t adhere well to very sharp edges. Industry standards recommend adding a small radius to corners for the oxide to form properly. Apple instead left the camera bump edges razor-sharp, purely for aesthetics. As a result, the oxide coating flakes off almost immediately at those corners. NotebookCheck explains that coins or keys will scrape off the barely present layer at the plateau edges, whereas on flat surfaces such residues often wipe away. In tests, the flat plateau held up, but every corner chipped to reveal bright silver aluminum underneath.

In contrast, the 17 Pro’s front and back glass use Ceramic Shield 2, which Apple says is much tougher (“3× more scratch resistant”). This new coating does greatly reduce glass scratches under normal use. (Indeed, NotebookCheck notes the display only scratches at Mohs 8 – on par with other flagships – a clear improvement.) However, the main vulnerability remains the metal frame. Even the plastic flash surround on the plateau was reported easily scuffed. Additionally, MagSafe accessories can mar the back glass: several reviewers found MagSafe chargers leaving circular marks on the Ceramic Shield (though these often wipe off). In short, every major surface – the painted aluminum sides, the ceramic glass back, even the plastic lens plate – has some risk: the aluminum edges scratch very easily, and even the back and flash cover can show wear if not protected.

In-Store Demo Units & Accessory Damage

Retail demos and accessories have brought the issue into sharp relief. Bloomberg and others found that fresh iPhone 17 displays in stores were already scratched. In Apple Stores from New York to Shanghai, deep blue 17 Pro/Max units showed scuffs after only a few hours on the shelf. The black iPhone Air demo was likewise marked up quickly. AppleInsider observed that these scratches weren’t from abuse – customers handling demo units normally still left visible damage. One forum commenter even speculated that the new plateau might be scraping against the store’s MagSafe stands (a design clash causing under-corner wear), but regardless, the takeaway is clear: out of-the-box, these phones need protection.

MagSafe accessories compound the concern. Reviewers report that the circular MagSafe charger magnetically attaches to the 17 Pro’s flat back but leaves a wipeable ring on the Ceramic Shield. Similarly, third-party rings or mounts could scratch if debris gets trapped. In practice, almost any contact – even a moment on a holder or a pocket with keys – can mar the anodized aluminum or glass surfaces. (As one tech writer warned, “either never set it down, or get a case” to avoid scratches.)

Illustrations from reviews and teardown videos show the point of failure – the painted aluminum chip on the raised camera plateau. These images match user photos on social media: the blue and orange finishes on the camera bump edges are visibly nicked, while the main body and glass remain intact. In summary, both polished demo units and real-world handling confirm that the iPhone 17 Pro (and even Air) scratch extremely easily when unprotected.

Apple’s Stance and Response

Apple has not publicly acknowledged any “scratchgate” issue. In its launch materials and statements, Apple instead emphasizes the 17 Pro’s durability enhancements: a “forged 7000-series aluminum” unibody with a new vapor chamber, and the first-ever Ceramic Shield on the back. The company notes the front and back glass have a special 3× scratch-resistant coating. AppleInsider reports that internally Apple claims the 17 Pro is “every bit as durable as previous models,” saying the switch to aluminum was for *“strength, lightness, and thermal conductivity”*. In practice, however, Apple has not directly addressed the customer complaints. No official statement offers a fix or apology; Apple continues to sell the phones with the new design unchanged. The only implicit response is the strong push to use cases – Apple’s own case lineup now includes models designed to cover the plateau – and of course the usual trade‑in and protection offers.

Expert and Reviewer Opinions

Tech reviewers broadly agree that the 17 Pro’s scratch issues stem from the known limits of anodized aluminum. Durability tester Zack “JerryRigEverything” Nelson bluntly states that the sharp plateau edges are Apple’s *“Achilles heel”*. NotebookCheck similarly calls it “Apple’s fault” for ignoring standards, noting that without rounding those corners, scratches are inevitable unless you use a case. CreativeBloq and others have even likened this to past “gates” (Antennagate, Bendgate), stressing that Apple prioritized look over practicality.

At the same time, many experts downplay its severity. They point out that the damage is cosmetic: the phone’s structural integrity and function aren’t compromised by minor nicks. Notably, JerryRigEverything found the 17 Pro unflinching in bend tests, calling it “the strongest iPhone the company has ever made,” save for the scratching quirk. Tech sites emphasize that these scratches do not mean the phone will break or underperform – it’s *“only a cosmetic issue”*. Reviewers also note that aluminum MacBooks and past black iPhones exhibited similar visible marks, so the 17 Pro is not unique in this regard. In sum, the consensus is that while the scratching is disappointing, it’s avoidable (by using protection) and won’t affect core use. As one analyst quipped, Wall Street observers (e.g. via MarketWatch) predict this won’t dent iPhone sales.

User Advice and Protection Strategies

Given the risk of scratching, experts advise early protection. The simplest step is a case or skin that covers the bump. Multiple reviewers recommend putting any 17 Pro in a case immediately. A case (especially one with a raised lip over the plateau) will hide the vulnerable edges entirely. If you prefer no bulky case, consider a thin vinyl skin or at least a camera-bump protector. Apple’s new silicone or leather cases are designed to wrap around the plateau’s rim; third-party MagSafe cases (e.g. from dbrand or UAG) can also help.

Color choice matters too. If you must go bare (or use a translucent case), pick a lighter finish. The Cosmic Orange or Silver models will show far less contrast when nicked. (Several users advise against Deep Blue or any dark color if scratches bother you.) You can also apply a clear “Armor” screen or back protector film to the flat surfaces, though the Ceramic Shield 2 is already quite tough. Don’t carry your phone loose with keys or coins, and clean the MagSafe area regularly – any dust caught between magnets can etch the aluminum coating.

Finally, remember that minor marks are ultimately cosmetic. As The Verge put it, you can “live with that patina” if necessary. In practice, most iPhones accumulate light scratches over time. If the look really matters, a case is the only foolproof guard. But know that the hardware underneath is essentially fine – these scuffs don’t harm the screen, cameras, or performance. In summary, the safest approach for an iPhone 17 Pro owner is simple: use a protective case (and perhaps a tempered-glass screen protector), and avoid abrasive contact. These steps will keep your phone looking new, even if the anodized finish wants to age.

Sources: Reports from The Verge, AppleInsider, MacRumors, 9to5Mac, Wccftech, CreativeBloq and others; first-hand durability tests (JerryRigEverything); plus user posts and Bloomberg store reports. Each citation marks the relevant detail above.

Perfect very nice

Beautiful device…

Scratch very fast, no quality for product